// This file is part of Eigen, a lightweight C++ template library
// for linear algebra.
//
// Copyright (C) 2012 Désiré Nuentsa-Wakam <desire.nuentsa_wakam@inria.fr>
//
// Eigen is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 3 of the License, or (at your option) any later version.
//
// Alternatively, you can redistribute it and/or
// modify it under the terms of the GNU General Public License as
// published by the Free Software Foundation; either version 2 of
// the License, or (at your option) any later version.
//
// Eigen is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
// FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License or the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License and a copy of the GNU General Public License along with
// Eigen. If not, see <http://www.gnu.org/licenses/>.

#ifndef EIGEN_INCOMPLETE_LUT_H
#define EIGEN_INCOMPLETE_LUT_H

namespace Eigen { 

/**
 * \brief Incomplete LU factorization with dual-threshold strategy
 * During the numerical factorization, two dropping rules are used :
 *  1) any element whose magnitude is less than some tolerance is dropped.
 *    This tolerance is obtained by multiplying the input tolerance @p droptol 
 *    by the average magnitude of all the original elements in the current row.
 *  2) After the elimination of the row, only the @p fill largest elements in 
 *    the L part and the @p fill largest elements in the U part are kept 
 *    (in addition to the diagonal element ). Note that @p fill is computed from 
 *    the input parameter @p fillfactor which is used the ratio to control the fill_in 
 *    relatively to the initial number of nonzero elements.
 * 
 * The two extreme cases are when @p droptol=0 (to keep all the @p fill*2 largest elements)
 * and when @p fill=n/2 with @p droptol being different to zero. 
 * 
 * References : Yousef Saad, ILUT: A dual threshold incomplete LU factorization, 
 *              Numerical Linear Algebra with Applications, 1(4), pp 387-402, 1994.
 * 
 * NOTE : The following implementation is derived from the ILUT implementation
 * in the SPARSKIT package, Copyright (C) 2005, the Regents of the University of Minnesota 
 *  released under the terms of the GNU LGPL; 
 * see http://www-users.cs.umn.edu/~saad/software/SPARSKIT/README for more details.
 */
template <typename _Scalar>
class IncompleteLUT : internal::noncopyable
{
    typedef _Scalar Scalar;
    typedef typename NumTraits<Scalar>::Real RealScalar;
    typedef Matrix<Scalar,Dynamic,1> Vector;
    typedef SparseMatrix<Scalar,RowMajor> FactorType;
    typedef SparseMatrix<Scalar,ColMajor> PermutType;
    typedef typename FactorType::Index Index;

  public:
    typedef Matrix<Scalar,Dynamic,Dynamic> MatrixType;
    
    IncompleteLUT()
      : m_droptol(NumTraits<Scalar>::dummy_precision()), m_fillfactor(10),
        m_analysisIsOk(false), m_factorizationIsOk(false), m_isInitialized(false)
    {}
    
    template<typename MatrixType>
    IncompleteLUT(const MatrixType& mat, RealScalar droptol=NumTraits<Scalar>::dummy_precision(), int fillfactor = 10)
      : m_droptol(droptol),m_fillfactor(fillfactor),
        m_analysisIsOk(false),m_factorizationIsOk(false),m_isInitialized(false)
    {
      eigen_assert(fillfactor != 0);
      compute(mat); 
    }
    
    Index rows() const { return m_lu.rows(); }
    
    Index cols() const { return m_lu.cols(); }

    /** \brief Reports whether previous computation was successful.
      *
      * \returns \c Success if computation was succesful,
      *          \c NumericalIssue if the matrix.appears to be negative.
      */
    ComputationInfo info() const
    {
      eigen_assert(m_isInitialized && "IncompleteLUT is not initialized.");
      return m_info;
    }
    
    template<typename MatrixType>
    void analyzePattern(const MatrixType& amat);
    
    template<typename MatrixType>
    void factorize(const MatrixType& amat);
    
    /**
      * Compute an incomplete LU factorization with dual threshold on the matrix mat
      * No pivoting is done in this version
      * 
      **/
    template<typename MatrixType>
    IncompleteLUT<Scalar>& compute(const MatrixType& amat)
    {
      analyzePattern(amat); 
      factorize(amat);
      eigen_assert(m_factorizationIsOk == true); 
      m_isInitialized = true;
      return *this;
    }

    void setDroptol(RealScalar droptol); 
    void setFillfactor(int fillfactor); 
    
    template<typename Rhs, typename Dest>
    void _solve(const Rhs& b, Dest& x) const
    {
      x = m_Pinv * b;  
      x = m_lu.template triangularView<UnitLower>().solve(x);
      x = m_lu.template triangularView<Upper>().solve(x);
      x = m_P * x; 
    }

    template<typename Rhs> inline const internal::solve_retval<IncompleteLUT, Rhs>
     solve(const MatrixBase<Rhs>& b) const
    {
      eigen_assert(m_isInitialized && "IncompleteLUT is not initialized.");
      eigen_assert(cols()==b.rows()
                && "IncompleteLUT::solve(): invalid number of rows of the right hand side matrix b");
      return internal::solve_retval<IncompleteLUT, Rhs>(*this, b.derived());
    }

protected:

    template <typename VectorV, typename VectorI>
    int QuickSplit(VectorV &row, VectorI &ind, int ncut);


    /** keeps off-diagonal entries; drops diagonal entries */
    struct keep_diag {
      inline bool operator() (const Index& row, const Index& col, const Scalar&) const
      {
        return row!=col;
      }
    };

protected:

    FactorType m_lu;
    RealScalar m_droptol;
    int m_fillfactor;
    bool m_analysisIsOk;
    bool m_factorizationIsOk;
    bool m_isInitialized;
    ComputationInfo m_info;
    PermutationMatrix<Dynamic,Dynamic,Index> m_P;     // Fill-reducing permutation
    PermutationMatrix<Dynamic,Dynamic,Index> m_Pinv;  // Inverse permutation
};

/**
 * Set control parameter droptol
 *  \param droptol   Drop any element whose magnitude is less than this tolerance 
 **/ 
template<typename Scalar>
void IncompleteLUT<Scalar>::setDroptol(RealScalar droptol)
{
  this->m_droptol = droptol;   
}

/**
 * Set control parameter fillfactor
 * \param fillfactor  This is used to compute the  number @p fill_in of largest elements to keep on each row. 
 **/ 
template<typename Scalar>
void IncompleteLUT<Scalar>::setFillfactor(int fillfactor)
{
  this->m_fillfactor = fillfactor;   
}


/**
 * Compute a quick-sort split of a vector 
 * On output, the vector row is permuted such that its elements satisfy
 * abs(row(i)) >= abs(row(ncut)) if i<ncut
 * abs(row(i)) <= abs(row(ncut)) if i>ncut 
 * \param row The vector of values
 * \param ind The array of index for the elements in @p row
 * \param ncut  The number of largest elements to keep
 **/ 
template <typename Scalar>
template <typename VectorV, typename VectorI>
int IncompleteLUT<Scalar>::QuickSplit(VectorV &row, VectorI &ind, int ncut)
{
  using std::swap;
  int mid;
  int n = row.size(); /* length of the vector */
  int first, last ; 
  
  ncut--; /* to fit the zero-based indices */
  first = 0; 
  last = n-1; 
  if (ncut < first || ncut > last ) return 0;
  
  do {
    mid = first; 
    RealScalar abskey = std::abs(row(mid)); 
    for (int j = first + 1; j <= last; j++) {
      if ( std::abs(row(j)) > abskey) {
        ++mid;
        swap(row(mid), row(j));
        swap(ind(mid), ind(j));
      }
    }
    /* Interchange for the pivot element */
    swap(row(mid), row(first));
    swap(ind(mid), ind(first));
    
    if (mid > ncut) last = mid - 1;
    else if (mid < ncut ) first = mid + 1; 
  } while (mid != ncut );
  
  return 0; /* mid is equal to ncut */ 
}

template <typename Scalar>
template<typename _MatrixType>
void IncompleteLUT<Scalar>::analyzePattern(const _MatrixType& amat)
{
  // Compute the Fill-reducing permutation
  SparseMatrix<Scalar,ColMajor, Index> mat1 = amat;
  SparseMatrix<Scalar,ColMajor, Index> mat2 = amat.transpose();
  // Symmetrize the pattern
  // FIXME for a matrix with nearly symmetric pattern, mat2+mat1 is the appropriate choice.
  //       on the other hand for a really non-symmetric pattern, mat2*mat1 should be prefered...
  SparseMatrix<Scalar,ColMajor, Index> AtA = mat2 + mat1;
  AtA.prune(keep_diag());
  internal::minimum_degree_ordering<Scalar, Index>(AtA, m_P);  // Then compute the AMD ordering...

  m_Pinv  = m_P.inverse(); // ... and the inverse permutation

  m_analysisIsOk = true;
}

template <typename Scalar>
template<typename _MatrixType>
void IncompleteLUT<Scalar>::factorize(const _MatrixType& amat)
{
  using std::sqrt;
  using std::swap;
  using std::abs;

  eigen_assert((amat.rows() == amat.cols()) && "The factorization should be done on a square matrix");
  int n = amat.cols();  // Size of the matrix
  m_lu.resize(n,n);
  // Declare Working vectors and variables
  Vector u(n) ;     // real values of the row -- maximum size is n --
  VectorXi ju(n);   // column position of the values in u -- maximum size  is n
  VectorXi jr(n);   // Indicate the position of the nonzero elements in the vector u -- A zero location is indicated by -1

  // Apply the fill-reducing permutation
  eigen_assert(m_analysisIsOk && "You must first call analyzePattern()");
  SparseMatrix<Scalar,RowMajor, Index> mat;
  mat = amat.twistedBy(m_Pinv);

  // Initialization
  jr.fill(-1);
  ju.fill(0);
  u.fill(0);

  // number of largest elements to keep in each row:
  int fill_in =   static_cast<int> (amat.nonZeros()*m_fillfactor)/n+1;
  if (fill_in > n) fill_in = n;

  // number of largest nonzero elements to keep in the L and the U part of the current row:
  int nnzL = fill_in/2;
  int nnzU = nnzL;
  m_lu.reserve(n * (nnzL + nnzU + 1));

  // global loop over the rows of the sparse matrix
  for (int ii = 0; ii < n; ii++)
  {
    // 1 - copy the lower and the upper part of the row i of mat in the working vector u

    int sizeu = 1; // number of nonzero elements in the upper part of the current row
    int sizel = 0; // number of nonzero elements in the lower part of the current row
    ju(ii)    = ii;
    u(ii)     = 0;
    jr(ii)    = ii;
    RealScalar rownorm = 0;

    typename FactorType::InnerIterator j_it(mat, ii); // Iterate through the current row ii
    for (; j_it; ++j_it)
    {
      int k = j_it.index();
      if (k < ii)
      {
        // copy the lower part
        ju(sizel) = k;
        u(sizel) = j_it.value();
        jr(k) = sizel;
        ++sizel;
      }
      else if (k == ii)
      {
        u(ii) = j_it.value();
      }
      else
      {
        // copy the upper part
        int jpos = ii + sizeu;
        ju(jpos) = k;
        u(jpos) = j_it.value();
        jr(k) = jpos;
        ++sizeu;
      }
      rownorm += internal::abs2(j_it.value());
    }

    // 2 - detect possible zero row
    if(rownorm==0)
    {
      m_info = NumericalIssue;
      return;
    }
    // Take the 2-norm of the current row as a relative tolerance
    rownorm = sqrt(rownorm);

    // 3 - eliminate the previous nonzero rows
    int jj = 0;
    int len = 0;
    while (jj < sizel)
    {
      // In order to eliminate in the correct order,
      // we must select first the smallest column index among  ju(jj:sizel)
      int k;
      int minrow = ju.segment(jj,sizel-jj).minCoeff(&k); // k is relative to the segment
      k += jj;
      if (minrow != ju(jj))
      {
        // swap the two locations
        int j = ju(jj);
        swap(ju(jj), ju(k));
        jr(minrow) = jj;   jr(j) = k;
        swap(u(jj), u(k));
      }
      // Reset this location
      jr(minrow) = -1;

      // Start elimination
      typename FactorType::InnerIterator ki_it(m_lu, minrow);
      while (ki_it && ki_it.index() < minrow) ++ki_it;
      eigen_internal_assert(ki_it && ki_it.col()==minrow);
      Scalar fact = u(jj) / ki_it.value();

      // drop too small elements
      if(abs(fact) <= m_droptol)
      {
        jj++;
        continue;
      }

      // linear combination of the current row ii and the row minrow
      ++ki_it;
      for (; ki_it; ++ki_it)
      {
        Scalar prod = fact * ki_it.value();
        int j       = ki_it.index();
        int jpos    = jr(j);
        if (jpos == -1) // fill-in element
        {
          int newpos;
          if (j >= ii) // dealing with the upper part
          {
            newpos = ii + sizeu;
            sizeu++;
            eigen_internal_assert(sizeu<=n);
          }
          else // dealing with the lower part
          {
            newpos = sizel;
            sizel++;
            eigen_internal_assert(sizel<=ii);
          }
          ju(newpos) = j;
          u(newpos) = -prod;
          jr(j) = newpos;
        }
        else
          u(jpos) -= prod;
      }
      // store the pivot element
      u(len) = fact;
      ju(len) = minrow;
      ++len;

      jj++;
    } // end of the elimination on the row ii

    // reset the upper part of the pointer jr to zero
    for(int k = 0; k <sizeu; k++) jr(ju(ii+k)) = -1;

    // 4 - partially sort and insert the elements in the m_lu matrix

    // sort the L-part of the row
    sizel = len;
    len = (std::min)(sizel, nnzL);
    typename Vector::SegmentReturnType ul(u.segment(0, sizel));
    typename VectorXi::SegmentReturnType jul(ju.segment(0, sizel));
    QuickSplit(ul, jul, len);

    // store the largest m_fill elements of the L part
    m_lu.startVec(ii);
    for(int k = 0; k < len; k++)
      m_lu.insertBackByOuterInnerUnordered(ii,ju(k)) = u(k);

    // store the diagonal element
    // apply a shifting rule to avoid zero pivots (we are doing an incomplete factorization)
    if (u(ii) == Scalar(0))
      u(ii) = sqrt(m_droptol) * rownorm;
    m_lu.insertBackByOuterInnerUnordered(ii, ii) = u(ii);

    // sort the U-part of the row
    // apply the dropping rule first
    len = 0;
    for(int k = 1; k < sizeu; k++)
    {
      if(abs(u(ii+k)) > m_droptol * rownorm )
      {
        ++len;
        u(ii + len)  = u(ii + k);
        ju(ii + len) = ju(ii + k);
      }
    }
    sizeu = len + 1; // +1 to take into account the diagonal element
    len = (std::min)(sizeu, nnzU);
    typename Vector::SegmentReturnType uu(u.segment(ii+1, sizeu-1));
    typename VectorXi::SegmentReturnType juu(ju.segment(ii+1, sizeu-1));
    QuickSplit(uu, juu, len);

    // store the largest elements of the U part
    for(int k = ii + 1; k < ii + len; k++)
      m_lu.insertBackByOuterInnerUnordered(ii,ju(k)) = u(k);
  }

  m_lu.finalize();
  m_lu.makeCompressed();

  m_factorizationIsOk = true;
  m_info = Success;
}

namespace internal {

template<typename _MatrixType, typename Rhs>
struct solve_retval<IncompleteLUT<_MatrixType>, Rhs>
  : solve_retval_base<IncompleteLUT<_MatrixType>, Rhs>
{
  typedef IncompleteLUT<_MatrixType> Dec;
  EIGEN_MAKE_SOLVE_HELPERS(Dec,Rhs)

  template<typename Dest> void evalTo(Dest& dst) const
  {
    dec()._solve(rhs(),dst);
  }
};

} // end namespace internal

} // end namespace Eigen

#endif // EIGEN_INCOMPLETE_LUT_H