| # Makefile.in generated by automake 1.8.3 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # $Id: Makefile.am,v 1.25 2004/09/16 08:12:28 opetzold Exp $ |
| |
| |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = . |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| INSTALL = @INSTALL@ |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| host_triplet = @host@ |
| DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in $(srcdir)/tvmet-config.in \ |
| $(srcdir)/tvmet.spec.in $(top_srcdir)/config/config.h.in \ |
| $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ |
| THANKS config/config.guess config/config.sub config/depcomp \ |
| config/install-sh config/ltmain.sh config/missing |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/config/ac_c_long_long.m4 \ |
| $(top_srcdir)/config/ac_create_prefix_config_h.m4 \ |
| $(top_srcdir)/config/ac_cxx_have_complex.m4 \ |
| $(top_srcdir)/config/ac_cxx_have_complex_math1.m4 \ |
| $(top_srcdir)/config/ac_cxx_have_complex_math2.m4 \ |
| $(top_srcdir)/config/ac_cxx_have_ieee_math.m4 \ |
| $(top_srcdir)/config/ac_cxx_have_mutable.m4 \ |
| $(top_srcdir)/config/ac_cxx_have_namespaces.m4 \ |
| $(top_srcdir)/config/ac_cxx_have_sysv_math.m4 \ |
| $(top_srcdir)/config/ac_cxx_partial_specialization.m4 \ |
| $(top_srcdir)/config/ac_cxx_typename.m4 \ |
| $(top_srcdir)/config/ac_set_compiler.m4 \ |
| $(top_srcdir)/config/op_doxygen_doc.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno configure.status.lineno |
| mkinstalldirs = $(mkdir_p) |
| CONFIG_HEADER = $(top_builddir)/config/config.h |
| CONFIG_CLEAN_FILES = tvmet-config tvmet.spec |
| am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(m4datadir)" |
| binSCRIPT_INSTALL = $(INSTALL_SCRIPT) |
| SCRIPTS = $(bin_SCRIPTS) |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-exec-recursive install-info-recursive \ |
| install-recursive installcheck-recursive installdirs-recursive \ |
| pdf-recursive ps-recursive uninstall-info-recursive \ |
| uninstall-recursive |
| man1dir = $(mandir)/man1 |
| NROFF = nroff |
| MANS = $(man_MANS) |
| m4dataDATA_INSTALL = $(INSTALL_DATA) |
| DATA = $(m4data_DATA) |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| { test ! -d $(distdir) \ |
| || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -fr $(distdir); }; } |
| DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 |
| GZIP_ENV = --best |
| distuninstallcheck_listfiles = find . -type f -print |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = @ACLOCAL@ |
| AMDEP_FALSE = @AMDEP_FALSE@ |
| AMDEP_TRUE = @AMDEP_TRUE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CONFIG_CPPUNIT_FALSE = @CONFIG_CPPUNIT_FALSE@ |
| CONFIG_CPPUNIT_TRUE = @CONFIG_CPPUNIT_TRUE@ |
| CONFIG_DOC_FALSE = @CONFIG_DOC_FALSE@ |
| CONFIG_DOC_TRUE = @CONFIG_DOC_TRUE@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CPPUNIT_CFLAGS = @CPPUNIT_CFLAGS@ |
| CPPUNIT_CONFIG = @CPPUNIT_CONFIG@ |
| CPPUNIT_LIBS = @CPPUNIT_LIBS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CXX_DEBUG_FLAGS = @CXX_DEBUG_FLAGS@ |
| CXX_OPTIMIZE_FLAGS = @CXX_OPTIMIZE_FLAGS@ |
| CXX_WARN_FLAGS = @CXX_WARN_FLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DOXYGEN = @DOXYGEN@ |
| DOXYGEN_HAVE_DOT = @DOXYGEN_HAVE_DOT@ |
| ECHO = @ECHO@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| F77 = @F77@ |
| FFLAGS = @FFLAGS@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LATEX_BATCHMODE = @LATEX_BATCHMODE@ |
| LATEX_MODE = @LATEX_MODE@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ |
| MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ |
| MAKEINFO = @MAKEINFO@ |
| OBJEXT = @OBJEXT@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| RANLIB = @RANLIB@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_F77 = @ac_ct_F77@ |
| ac_ct_RANLIB = @ac_ct_RANLIB@ |
| ac_ct_STRIP = @ac_ct_STRIP@ |
| am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ |
| am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| datadir = @datadir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| ACLOCAL_AMFLAGS = -I config |
| SUBDIRS = include examples testsuite doc tests benchmark |
| m4sources = \ |
| config/ac_c_long_long.m4 \ |
| config/ac_create_prefix_config_h.m4 \ |
| config/ac_cxx_have_complex.m4 \ |
| config/ac_cxx_have_complex_math1.m4 \ |
| config/ac_cxx_have_complex_math2.m4 \ |
| config/ac_cxx_have_ieee_math.m4 \ |
| config/ac_cxx_have_mutable.m4 \ |
| config/ac_cxx_have_namespaces.m4 \ |
| config/ac_cxx_have_sysv_math.m4 \ |
| config/ac_cxx_partial_specialization.m4 \ |
| config/ac_cxx_typename.m4 \ |
| config/ac_set_compiler.m4 \ |
| config/ac_prog_cxx_intel.m4 \ |
| config/ac_prog_cxx_kai.m4 \ |
| config/ac_prog_cxx_pgi.m4 \ |
| config/op_doxygen_doc.m4 |
| |
| |
| # m4 automake macros |
| m4datadir = $(datadir)/aclocal |
| m4data_DATA = tvmet.m4 |
| |
| # setup/config scripts |
| bin_SCRIPTS = tvmet-config |
| |
| # manual for script |
| man_MANS = tvmet-config.1 |
| EXTRA_DIST = \ |
| $(m4sources) \ |
| $(m4data_DATA) \ |
| $(man_MANS) \ |
| ChangeLog.1 \ |
| LICENSE |
| |
| DISTCLEANFILES = \ |
| $(PACKAGE)-docs-$(VERSION).tar.bz2 \ |
| $(PACKAGE)-$(VERSION).pdf.bz2 |
| |
| all: all-recursive |
| |
| .SUFFIXES: |
| am--refresh: |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ |
| cd $(srcdir) && $(AUTOMAKE) --gnu \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| |
| config/config.h: config/stamp-h1 |
| @if test ! -f $@; then \ |
| rm -f config/stamp-h1; \ |
| $(MAKE) config/stamp-h1; \ |
| else :; fi |
| |
| config/stamp-h1: $(top_srcdir)/config/config.h.in $(top_builddir)/config.status |
| @rm -f config/stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config/config.h |
| $(top_srcdir)/config/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_srcdir) && $(AUTOHEADER) |
| rm -f config/stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f config/config.h config/stamp-h1 |
| tvmet-config: $(top_builddir)/config.status $(srcdir)/tvmet-config.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| tvmet.spec: $(top_builddir)/config.status $(srcdir)/tvmet.spec.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| install-binSCRIPTS: $(bin_SCRIPTS) |
| @$(NORMAL_INSTALL) |
| test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" |
| @list='$(bin_SCRIPTS)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f $$d$$p; then \ |
| f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ |
| echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \ |
| $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \ |
| else :; fi; \ |
| done |
| |
| uninstall-binSCRIPTS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(bin_SCRIPTS)'; for p in $$list; do \ |
| f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ |
| echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(bindir)/$$f"; \ |
| done |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| uninstall-info-am: |
| install-man1: $(man1_MANS) $(man_MANS) |
| @$(NORMAL_INSTALL) |
| test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" |
| @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ |
| l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ |
| for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ |
| else file=$$i; fi; \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| case "$$ext" in \ |
| 1*) ;; \ |
| *) ext='1' ;; \ |
| esac; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed -e 's/^.*\///'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ |
| done |
| uninstall-man1: |
| @$(NORMAL_UNINSTALL) |
| @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ |
| l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ |
| for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| case "$$ext" in \ |
| 1*) ;; \ |
| *) ext='1' ;; \ |
| esac; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed -e 's/^.*\///'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ |
| done |
| install-m4dataDATA: $(m4data_DATA) |
| @$(NORMAL_INSTALL) |
| test -z "$(m4datadir)" || $(mkdir_p) "$(DESTDIR)$(m4datadir)" |
| @list='$(m4data_DATA)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f="`echo $$p | sed -e 's|^.*/||'`"; \ |
| echo " $(m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \ |
| $(m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \ |
| done |
| |
| uninstall-m4dataDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(m4data_DATA)'; for p in $$list; do \ |
| f="`echo $$p | sed -e 's|^.*/||'`"; \ |
| echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(m4datadir)/$$f"; \ |
| done |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @set fnord $$MAKEFLAGS; amf=$$2; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| mostlyclean-recursive clean-recursive distclean-recursive \ |
| maintainer-clean-recursive: |
| @set fnord $$MAKEFLAGS; amf=$$2; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if (etags --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| else \ |
| include_option=--include; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -f $$subdir/TAGS && \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(ETAGS_ARGS)$$tags$$unique" \ |
| || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| mkdir $(distdir) |
| $(mkdir_p) $(distdir)/. $(distdir)/config $(distdir)/doc $(distdir)/include/tvmet/config |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ |
| list='$(DISTFILES)'; for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ |
| esac; \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
| dir="/$$dir"; \ |
| $(mkdir_p) "$(distdir)$$dir"; \ |
| else \ |
| dir=''; \ |
| fi; \ |
| if test -d $$d/$$file; then \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || mkdir "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="../$(top_distdir)" \ |
| distdir="../$(distdir)/$$subdir" \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r $(distdir) |
| dist-gzip: distdir |
| $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| dist-bzip2: distdir |
| $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| dist-tarZ: distdir |
| $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z |
| $(am__remove_distdir) |
| |
| dist-shar: distdir |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__remove_distdir) |
| |
| dist dist-all: distdir |
| $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ |
| *.tar.bz2*) \ |
| bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir); chmod a+w $(distdir) |
| mkdir $(distdir)/_build |
| mkdir $(distdir)/_inst |
| chmod a-w $(distdir) |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && cd $(distdir)/_build \ |
| && ../configure --srcdir=.. --prefix="$$dc_install_base" \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck |
| $(am__remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' |
| distuninstallcheck: |
| @cd $(distuninstallcheck_dir) \ |
| && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(SCRIPTS) $(MANS) $(DATA) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(m4datadir)"; do \ |
| test -z "$$dir" || $(mkdir_p) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -rm -f $(CONFIG_CLEAN_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-hdr \ |
| distclean-libtool distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-m4dataDATA install-man |
| |
| install-exec-am: install-binSCRIPTS |
| |
| install-info: install-info-recursive |
| |
| install-man: install-man1 |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-binSCRIPTS uninstall-info-am \ |
| uninstall-m4dataDATA uninstall-man |
| |
| uninstall-info: uninstall-info-recursive |
| |
| uninstall-man: uninstall-man1 |
| |
| .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ |
| check-am clean clean-generic clean-libtool clean-recursive \ |
| ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ |
| dist-shar dist-tarZ dist-zip distcheck distclean \ |
| distclean-generic distclean-hdr distclean-libtool \ |
| distclean-recursive distclean-tags distcleancheck distdir \ |
| distuninstallcheck dvi dvi-am html html-am info info-am \ |
| install install-am install-binSCRIPTS install-data \ |
| install-data-am install-exec install-exec-am install-info \ |
| install-info-am install-m4dataDATA install-man install-man1 \ |
| install-strip installcheck installcheck-am installdirs \ |
| installdirs-am maintainer-clean maintainer-clean-generic \ |
| maintainer-clean-recursive mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ |
| tags tags-recursive uninstall uninstall-am \ |
| uninstall-binSCRIPTS uninstall-info-am uninstall-m4dataDATA \ |
| uninstall-man uninstall-man1 |
| |
| |
| # Targets |
| ChangeLog: |
| @if test -d CVS -a -x `which cvs2log`; then \ |
| echo "Create ChangeLog from CVS"; \ |
| `which cvs2log`; \ |
| fi |
| |
| dist-hook: ChangeLog |
| cp tvmet.spec $(distdir) |
| $(MAKE) doc-dist |
| @if test -f $(top_builddir)/doc/$(PACKAGE)-$(VERSION).ps; then \ |
| $(LN_S) $(top_builddir)/doc/$(PACKAGE)-$(VERSION).ps $(PACKAGE)-$(VERSION).ps; \ |
| cat $(top_builddir)/doc/$(PACKAGE)-$(VERSION).ps | bzip2 --best > $(PACKAGE)-$(VERSION).ps.bz2; \ |
| fi |
| @if test -f $(top_builddir)/doc/$(PACKAGE)-$(VERSION).pdf; then \ |
| $(LN_S) $(top_builddir)/doc/$(PACKAGE)-$(VERSION).pdf $(PACKAGE)-$(VERSION).pdf; \ |
| cat $(top_builddir)/doc/$(PACKAGE)-$(VERSION).pdf | bzip2 --best > $(PACKAGE)-$(VERSION).pdf.bz2; \ |
| fi |
| |
| .PHONY: release snapshot rpm docs doc-dist |
| |
| release: |
| rm -rf .deps */.deps |
| $(MAKE) distcheck |
| |
| snapshot: |
| $(MAKE) dist distdir=$(PACKAGE)-$(VERSION)-`date +"%y%m%d"` |
| |
| docs: |
| $(MAKE) -C doc |
| |
| @CONFIG_DOC_TRUE@doc-dist: docs |
| @CONFIG_DOC_TRUE@ $(MAKE) -C doc doc-dist |
| @CONFIG_DOC_TRUE@ mv -f doc/$(PACKAGE)-docs-$(VERSION).tar.bz2 . |
| @CONFIG_DOC_FALSE@doc-dist: |
| |
| example: |
| $(MAKE) -C examples example |
| |
| rpm: dist |
| @if test -f $(PACKAGE).spec; then \ |
| echo "Build rpm distribution"; \ |
| $(RM) $(PACKAGE).spec && make $(PACKAGE).spec; \ |
| fi |
| rpm -ta --target noarch $(PACKAGE)-$(VERSION).tar.bz2 |
| cp ~/RPM/SRPMS/$(PACKAGE)-$(VERSION)-1.src.rpm . |
| cp ~/RPM/RPMS/noarch/$(PACKAGE)-$(VERSION)-1.noarch.rpm . |
| |
| md5: |
| md5sum `find . -maxdepth 1 -name "*.rpm" -or -name "*.gz" -or -name "*.bz2" -xtype f` > MD5sums |
| |
| sign: md5 |
| cat MD5sums | gpg --clearsign > .MD5sums && mv .MD5sums MD5sums |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
