| /* Copyright 2017 The TensorFlow Authors. All Rights Reserved. |
| |
| Licensed under the Apache License, Version 2.0 (the "License"); |
| you may not use this file except in compliance with the License. |
| You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| ==============================================================================*/ |
| |
| #ifndef EIGEN_BFLOAT16_H |
| #define EIGEN_BFLOAT16_H |
| |
| // IWYU pragma: private |
| #include "../../InternalHeaderCheck.h" |
| |
| #if defined(EIGEN_HAS_HIP_BF16) |
| // When compiling with GPU support, the "hip_bfloat16" base class as well as |
| // some other routines are defined in the GPU compiler header files |
| // (hip_bfloat16.h), and they are not tagged constexpr |
| // As a consequence, we get compile failures when compiling Eigen with |
| // GPU support. Hence the need to disable EIGEN_CONSTEXPR when building |
| // Eigen with GPU support |
| #pragma push_macro("EIGEN_CONSTEXPR") |
| #undef EIGEN_CONSTEXPR |
| #define EIGEN_CONSTEXPR |
| #endif |
| |
| #define BF16_PACKET_FUNCTION(PACKET_F, PACKET_BF16, METHOD) \ |
| template <> \ |
| EIGEN_DEFINE_FUNCTION_ALLOWING_MULTIPLE_DEFINITIONS EIGEN_UNUSED PACKET_BF16 METHOD<PACKET_BF16>( \ |
| const PACKET_BF16& _x) { \ |
| return F32ToBf16(METHOD<PACKET_F>(Bf16ToF32(_x))); \ |
| } |
| |
| // Only use HIP GPU bf16 in kernels |
| #if defined(EIGEN_HAS_HIP_BF16) && defined(EIGEN_GPU_COMPILE_PHASE) |
| #define EIGEN_USE_HIP_BF16 |
| #endif |
| |
| namespace Eigen { |
| |
| struct bfloat16; |
| |
| namespace numext { |
| template <> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC Eigen::bfloat16 bit_cast<Eigen::bfloat16, uint16_t>(const uint16_t& src); |
| |
| template <> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC uint16_t bit_cast<uint16_t, Eigen::bfloat16>(const Eigen::bfloat16& src); |
| } // namespace numext |
| namespace bfloat16_impl { |
| |
| #if defined(EIGEN_USE_HIP_BF16) |
| |
| struct __bfloat16_raw : public hip_bfloat16 { |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR __bfloat16_raw() {} |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR __bfloat16_raw(hip_bfloat16 hb) : hip_bfloat16(hb) {} |
| explicit EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR __bfloat16_raw(unsigned short raw) : hip_bfloat16(raw) {} |
| }; |
| |
| #else |
| |
| // Make our own __bfloat16_raw definition. |
| struct __bfloat16_raw { |
| #if defined(EIGEN_HAS_HIP_BF16) && !defined(EIGEN_GPU_COMPILE_PHASE) |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR __bfloat16_raw() {} |
| #else |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR __bfloat16_raw() : value(0) {} |
| #endif |
| explicit EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR __bfloat16_raw(unsigned short raw) : value(raw) {} |
| unsigned short value; |
| }; |
| |
| #endif // defined(EIGEN_USE_HIP_BF16) |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR __bfloat16_raw raw_uint16_to_bfloat16(unsigned short value); |
| template <bool AssumeArgumentIsNormalOrInfinityOrZero> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC __bfloat16_raw float_to_bfloat16_rtne(float ff); |
| // Forward declarations of template specializations, to avoid Visual C++ 2019 errors, saying: |
| // > error C2908: explicit specialization; 'float_to_bfloat16_rtne' has already been instantiated |
| template <> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC __bfloat16_raw float_to_bfloat16_rtne<false>(float ff); |
| template <> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC __bfloat16_raw float_to_bfloat16_rtne<true>(float ff); |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC float bfloat16_to_float(__bfloat16_raw h); |
| |
| struct bfloat16_base : public __bfloat16_raw { |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR bfloat16_base() {} |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR bfloat16_base(const __bfloat16_raw& h) : __bfloat16_raw(h) {} |
| }; |
| |
| } // namespace bfloat16_impl |
| |
| // Class definition. |
| struct bfloat16 : public bfloat16_impl::bfloat16_base { |
| typedef bfloat16_impl::__bfloat16_raw __bfloat16_raw; |
| |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR bfloat16() {} |
| |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR bfloat16(const __bfloat16_raw& h) : bfloat16_impl::bfloat16_base(h) {} |
| |
| explicit EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR bfloat16(bool b) |
| : bfloat16_impl::bfloat16_base(bfloat16_impl::raw_uint16_to_bfloat16(b ? 0x3f80 : 0)) {} |
| |
| template <class T> |
| explicit EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR bfloat16(T val) |
| : bfloat16_impl::bfloat16_base( |
| bfloat16_impl::float_to_bfloat16_rtne<internal::is_integral<T>::value>(static_cast<float>(val))) {} |
| |
| explicit EIGEN_DEVICE_FUNC bfloat16(float f) |
| : bfloat16_impl::bfloat16_base(bfloat16_impl::float_to_bfloat16_rtne<false>(f)) {} |
| |
| // Following the convention of numpy, converting between complex and |
| // float will lead to loss of imag value. |
| template <typename RealScalar> |
| explicit EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR bfloat16(const std::complex<RealScalar>& val) |
| : bfloat16_impl::bfloat16_base(bfloat16_impl::float_to_bfloat16_rtne<false>(static_cast<float>(val.real()))) {} |
| |
| EIGEN_DEVICE_FUNC operator float() const { // NOLINT: Allow implicit conversion to float, because it is lossless. |
| return bfloat16_impl::bfloat16_to_float(*this); |
| } |
| }; |
| |
| // TODO(majnemer): Get rid of this once we can rely on C++17 inline variables do |
| // solve the ODR issue. |
| namespace bfloat16_impl { |
| template <typename = void> |
| struct numeric_limits_bfloat16_impl { |
| static EIGEN_CONSTEXPR const bool is_specialized = true; |
| static EIGEN_CONSTEXPR const bool is_signed = true; |
| static EIGEN_CONSTEXPR const bool is_integer = false; |
| static EIGEN_CONSTEXPR const bool is_exact = false; |
| static EIGEN_CONSTEXPR const bool has_infinity = true; |
| static EIGEN_CONSTEXPR const bool has_quiet_NaN = true; |
| static EIGEN_CONSTEXPR const bool has_signaling_NaN = true; |
| EIGEN_DIAGNOSTICS(push) |
| EIGEN_DISABLE_DEPRECATED_WARNING |
| static EIGEN_CONSTEXPR const std::float_denorm_style has_denorm = std::denorm_present; |
| static EIGEN_CONSTEXPR const bool has_denorm_loss = false; |
| EIGEN_DIAGNOSTICS(pop) |
| static EIGEN_CONSTEXPR const std::float_round_style round_style = std::numeric_limits<float>::round_style; |
| static EIGEN_CONSTEXPR const bool is_iec559 = true; |
| // The C++ standard defines this as "true if the set of values representable |
| // by the type is finite." BFloat16 has finite precision. |
| static EIGEN_CONSTEXPR const bool is_bounded = true; |
| static EIGEN_CONSTEXPR const bool is_modulo = false; |
| static EIGEN_CONSTEXPR const int digits = 8; |
| static EIGEN_CONSTEXPR const int digits10 = 2; |
| static EIGEN_CONSTEXPR const int max_digits10 = 4; |
| static EIGEN_CONSTEXPR const int radix = std::numeric_limits<float>::radix; |
| static EIGEN_CONSTEXPR const int min_exponent = std::numeric_limits<float>::min_exponent; |
| static EIGEN_CONSTEXPR const int min_exponent10 = std::numeric_limits<float>::min_exponent10; |
| static EIGEN_CONSTEXPR const int max_exponent = std::numeric_limits<float>::max_exponent; |
| static EIGEN_CONSTEXPR const int max_exponent10 = std::numeric_limits<float>::max_exponent10; |
| static EIGEN_CONSTEXPR const bool traps = std::numeric_limits<float>::traps; |
| // IEEE754: "The implementer shall choose how tininess is detected, but shall |
| // detect tininess in the same way for all operations in radix two" |
| static EIGEN_CONSTEXPR const bool tinyness_before = std::numeric_limits<float>::tinyness_before; |
| |
| static EIGEN_CONSTEXPR Eigen::bfloat16(min)() { return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0x0080); } |
| static EIGEN_CONSTEXPR Eigen::bfloat16 lowest() { return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0xff7f); } |
| static EIGEN_CONSTEXPR Eigen::bfloat16(max)() { return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0x7f7f); } |
| static EIGEN_CONSTEXPR Eigen::bfloat16 epsilon() { return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0x3c00); } |
| static EIGEN_CONSTEXPR Eigen::bfloat16 round_error() { return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0x3f00); } |
| static EIGEN_CONSTEXPR Eigen::bfloat16 infinity() { return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0x7f80); } |
| static EIGEN_CONSTEXPR Eigen::bfloat16 quiet_NaN() { return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0x7fc0); } |
| static EIGEN_CONSTEXPR Eigen::bfloat16 signaling_NaN() { |
| return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0x7fa0); |
| } |
| static EIGEN_CONSTEXPR Eigen::bfloat16 denorm_min() { return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(0x0001); } |
| }; |
| |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::is_specialized; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::is_signed; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::is_integer; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::is_exact; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::has_infinity; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::has_quiet_NaN; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::has_signaling_NaN; |
| EIGEN_DIAGNOSTICS(push) |
| EIGEN_DISABLE_DEPRECATED_WARNING |
| template <typename T> |
| EIGEN_CONSTEXPR const std::float_denorm_style numeric_limits_bfloat16_impl<T>::has_denorm; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::has_denorm_loss; |
| EIGEN_DIAGNOSTICS(pop) |
| template <typename T> |
| EIGEN_CONSTEXPR const std::float_round_style numeric_limits_bfloat16_impl<T>::round_style; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::is_iec559; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::is_bounded; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::is_modulo; |
| template <typename T> |
| EIGEN_CONSTEXPR const int numeric_limits_bfloat16_impl<T>::digits; |
| template <typename T> |
| EIGEN_CONSTEXPR const int numeric_limits_bfloat16_impl<T>::digits10; |
| template <typename T> |
| EIGEN_CONSTEXPR const int numeric_limits_bfloat16_impl<T>::max_digits10; |
| template <typename T> |
| EIGEN_CONSTEXPR const int numeric_limits_bfloat16_impl<T>::radix; |
| template <typename T> |
| EIGEN_CONSTEXPR const int numeric_limits_bfloat16_impl<T>::min_exponent; |
| template <typename T> |
| EIGEN_CONSTEXPR const int numeric_limits_bfloat16_impl<T>::min_exponent10; |
| template <typename T> |
| EIGEN_CONSTEXPR const int numeric_limits_bfloat16_impl<T>::max_exponent; |
| template <typename T> |
| EIGEN_CONSTEXPR const int numeric_limits_bfloat16_impl<T>::max_exponent10; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::traps; |
| template <typename T> |
| EIGEN_CONSTEXPR const bool numeric_limits_bfloat16_impl<T>::tinyness_before; |
| } // end namespace bfloat16_impl |
| } // end namespace Eigen |
| |
| namespace std { |
| // If std::numeric_limits<T> is specialized, should also specialize |
| // std::numeric_limits<const T>, std::numeric_limits<volatile T>, and |
| // std::numeric_limits<const volatile T> |
| // https://stackoverflow.com/a/16519653/ |
| template <> |
| class numeric_limits<Eigen::bfloat16> : public Eigen::bfloat16_impl::numeric_limits_bfloat16_impl<> {}; |
| template <> |
| class numeric_limits<const Eigen::bfloat16> : public numeric_limits<Eigen::bfloat16> {}; |
| template <> |
| class numeric_limits<volatile Eigen::bfloat16> : public numeric_limits<Eigen::bfloat16> {}; |
| template <> |
| class numeric_limits<const volatile Eigen::bfloat16> : public numeric_limits<Eigen::bfloat16> {}; |
| } // end namespace std |
| |
| namespace Eigen { |
| |
| namespace bfloat16_impl { |
| |
| // We need to distinguish ‘clang as the CUDA compiler’ from ‘clang as the host compiler, |
| // invoked by NVCC’ (e.g. on MacOS). The former needs to see both host and device implementation |
| // of the functions, while the latter can only deal with one of them. |
| #if !defined(EIGEN_HAS_NATIVE_BF16) || (EIGEN_COMP_CLANG && !EIGEN_COMP_NVCC) // Emulate support for bfloat16 floats |
| |
| #if EIGEN_COMP_CLANG && defined(EIGEN_CUDACC) |
| // We need to provide emulated *host-side* BF16 operators for clang. |
| #pragma push_macro("EIGEN_DEVICE_FUNC") |
| #undef EIGEN_DEVICE_FUNC |
| #if (defined(EIGEN_HAS_GPU_BF16) && defined(EIGEN_HAS_NATIVE_BF16)) |
| #define EIGEN_DEVICE_FUNC __host__ |
| #else // both host and device need emulated ops. |
| #define EIGEN_DEVICE_FUNC __host__ __device__ |
| #endif |
| #endif |
| |
| // Definitions for CPUs, mostly working through conversion |
| // to/from fp32. |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator+(const bfloat16& a, const bfloat16& b) { |
| return bfloat16(float(a) + float(b)); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator+(const bfloat16& a, const int& b) { |
| return bfloat16(float(a) + static_cast<float>(b)); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator+(const int& a, const bfloat16& b) { |
| return bfloat16(static_cast<float>(a) + float(b)); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator*(const bfloat16& a, const bfloat16& b) { |
| return bfloat16(float(a) * float(b)); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator-(const bfloat16& a, const bfloat16& b) { |
| return bfloat16(float(a) - float(b)); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator/(const bfloat16& a, const bfloat16& b) { |
| return bfloat16(float(a) / float(b)); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator-(const bfloat16& a) { |
| numext::uint16_t x = numext::bit_cast<uint16_t>(a) ^ 0x8000; |
| return numext::bit_cast<bfloat16>(x); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16& operator+=(bfloat16& a, const bfloat16& b) { |
| a = bfloat16(float(a) + float(b)); |
| return a; |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16& operator*=(bfloat16& a, const bfloat16& b) { |
| a = bfloat16(float(a) * float(b)); |
| return a; |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16& operator-=(bfloat16& a, const bfloat16& b) { |
| a = bfloat16(float(a) - float(b)); |
| return a; |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16& operator/=(bfloat16& a, const bfloat16& b) { |
| a = bfloat16(float(a) / float(b)); |
| return a; |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator++(bfloat16& a) { |
| a += bfloat16(1); |
| return a; |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator--(bfloat16& a) { |
| a -= bfloat16(1); |
| return a; |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator++(bfloat16& a, int) { |
| bfloat16 original_value = a; |
| ++a; |
| return original_value; |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator--(bfloat16& a, int) { |
| bfloat16 original_value = a; |
| --a; |
| return original_value; |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool operator==(const bfloat16& a, const bfloat16& b) { |
| return numext::equal_strict(float(a), float(b)); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool operator!=(const bfloat16& a, const bfloat16& b) { |
| return numext::not_equal_strict(float(a), float(b)); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool operator<(const bfloat16& a, const bfloat16& b) { |
| return float(a) < float(b); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool operator<=(const bfloat16& a, const bfloat16& b) { |
| return float(a) <= float(b); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool operator>(const bfloat16& a, const bfloat16& b) { |
| return float(a) > float(b); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool operator>=(const bfloat16& a, const bfloat16& b) { |
| return float(a) >= float(b); |
| } |
| |
| #if EIGEN_COMP_CLANG && defined(EIGEN_CUDACC) |
| #pragma pop_macro("EIGEN_DEVICE_FUNC") |
| #endif |
| #endif // Emulate support for bfloat16 floats |
| |
| // Division by an index. Do it in full float precision to avoid accuracy |
| // issues in converting the denominator to bfloat16. |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 operator/(const bfloat16& a, Index b) { |
| return bfloat16(static_cast<float>(a) / static_cast<float>(b)); |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC __bfloat16_raw truncate_to_bfloat16(const float v) { |
| #if defined(EIGEN_USE_HIP_BF16) |
| return __bfloat16_raw(__bfloat16_raw::round_to_bfloat16(v, __bfloat16_raw::truncate)); |
| #else |
| __bfloat16_raw output; |
| if (numext::isnan EIGEN_NOT_A_MACRO(v)) { |
| output.value = std::signbit(v) ? 0xFFC0 : 0x7FC0; |
| return output; |
| } |
| output.value = static_cast<numext::uint16_t>(numext::bit_cast<numext::uint32_t>(v) >> 16); |
| return output; |
| #endif |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR __bfloat16_raw raw_uint16_to_bfloat16(numext::uint16_t value) { |
| #if defined(EIGEN_USE_HIP_BF16) |
| __bfloat16_raw bf; |
| bf.data = value; |
| return bf; |
| #else |
| return __bfloat16_raw(value); |
| #endif |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR numext::uint16_t raw_bfloat16_as_uint16( |
| const __bfloat16_raw& bf) { |
| #if defined(EIGEN_USE_HIP_BF16) |
| return bf.data; |
| #else |
| return bf.value; |
| #endif |
| } |
| |
| // float_to_bfloat16_rtne template specialization that does not make any |
| // assumption about the value of its function argument (ff). |
| template <> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC __bfloat16_raw float_to_bfloat16_rtne<false>(float ff) { |
| #if defined(EIGEN_USE_HIP_BF16) |
| return __bfloat16_raw(__bfloat16_raw::round_to_bfloat16(ff)); |
| #else |
| __bfloat16_raw output; |
| |
| if (numext::isnan EIGEN_NOT_A_MACRO(ff)) { |
| // If the value is a NaN, squash it to a qNaN with msb of fraction set, |
| // this makes sure after truncation we don't end up with an inf. |
| // |
| // qNaN magic: All exponent bits set + most significant bit of fraction |
| // set. |
| output.value = std::signbit(ff) ? 0xFFC0 : 0x7FC0; |
| } else { |
| // Fast rounding algorithm that rounds a half value to nearest even. This |
| // reduces expected error when we convert a large number of floats. Here |
| // is how it works: |
| // |
| // Definitions: |
| // To convert a float 32 to bfloat16, a float 32 can be viewed as 32 bits |
| // with the following tags: |
| // |
| // Sign | Exp (8 bits) | Frac (23 bits) |
| // S EEEEEEEE FFFFFFLRTTTTTTTTTTTTTTT |
| // |
| // S: Sign bit. |
| // E: Exponent bits. |
| // F: First 6 bits of fraction. |
| // L: Least significant bit of resulting bfloat16 if we truncate away the |
| // rest of the float32. This is also the 7th bit of fraction |
| // R: Rounding bit, 8th bit of fraction. |
| // T: Sticky bits, rest of fraction, 15 bits. |
| // |
| // To round half to nearest even, there are 3 cases where we want to round |
| // down (simply truncate the result of the bits away, which consists of |
| // rounding bit and sticky bits) and two cases where we want to round up |
| // (truncate then add one to the result). |
| // |
| // The fast converting algorithm simply adds lsb (L) to 0x7fff (15 bits of |
| // 1s) as the rounding bias, adds the rounding bias to the input, then |
| // truncates the last 16 bits away. |
| // |
| // To understand how it works, we can analyze this algorithm case by case: |
| // |
| // 1. L = 0, R = 0: |
| // Expect: round down, this is less than half value. |
| // |
| // Algorithm: |
| // - Rounding bias: 0x7fff + 0 = 0x7fff |
| // - Adding rounding bias to input may create any carry, depending on |
| // whether there is any value set to 1 in T bits. |
| // - R may be set to 1 if there is a carry. |
| // - L remains 0. |
| // - Note that this case also handles Inf and -Inf, where all fraction |
| // bits, including L, R and Ts are all 0. The output remains Inf after |
| // this algorithm. |
| // |
| // 2. L = 1, R = 0: |
| // Expect: round down, this is less than half value. |
| // |
| // Algorithm: |
| // - Rounding bias: 0x7fff + 1 = 0x8000 |
| // - Adding rounding bias to input doesn't change sticky bits but |
| // adds 1 to rounding bit. |
| // - L remains 1. |
| // |
| // 3. L = 0, R = 1, all of T are 0: |
| // Expect: round down, this is exactly at half, the result is already |
| // even (L=0). |
| // |
| // Algorithm: |
| // - Rounding bias: 0x7fff + 0 = 0x7fff |
| // - Adding rounding bias to input sets all sticky bits to 1, but |
| // doesn't create a carry. |
| // - R remains 1. |
| // - L remains 0. |
| // |
| // 4. L = 1, R = 1: |
| // Expect: round up, this is exactly at half, the result needs to be |
| // round to the next even number. |
| // |
| // Algorithm: |
| // - Rounding bias: 0x7fff + 1 = 0x8000 |
| // - Adding rounding bias to input doesn't change sticky bits, but |
| // creates a carry from rounding bit. |
| // - The carry sets L to 0, creates another carry bit and propagate |
| // forward to F bits. |
| // - If all the F bits are 1, a carry then propagates to the exponent |
| // bits, which then creates the minimum value with the next exponent |
| // value. Note that we won't have the case where exponents are all 1, |
| // since that's either a NaN (handled in the other if condition) or inf |
| // (handled in case 1). |
| // |
| // 5. L = 0, R = 1, any of T is 1: |
| // Expect: round up, this is greater than half. |
| // |
| // Algorithm: |
| // - Rounding bias: 0x7fff + 0 = 0x7fff |
| // - Adding rounding bias to input creates a carry from sticky bits, |
| // sets rounding bit to 0, then create another carry. |
| // - The second carry sets L to 1. |
| // |
| // Examples: |
| // |
| // Exact half value that is already even: |
| // Input: |
| // Sign | Exp (8 bit) | Frac (first 7 bit) | Frac (last 16 bit) |
| // S E E E E E E E E F F F F F F L RTTTTTTTTTTTTTTT |
| // 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1000000000000000 |
| // |
| // This falls into case 3. We truncate the rest of 16 bits and no |
| // carry is created into F and L: |
| // |
| // Output: |
| // Sign | Exp (8 bit) | Frac (first 7 bit) |
| // S E E E E E E E E F F F F F F L |
| // 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 |
| // |
| // Exact half value, round to next even number: |
| // Input: |
| // Sign | Exp (8 bit) | Frac (first 7 bit) | Frac (last 16 bit) |
| // S E E E E E E E E F F F F F F L RTTTTTTTTTTTTTTT |
| // 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1000000000000000 |
| // |
| // This falls into case 4. We create a carry from R and T, |
| // which then propagates into L and F: |
| // |
| // Output: |
| // Sign | Exp (8 bit) | Frac (first 7 bit) |
| // S E E E E E E E E F F F F F F L |
| // 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 |
| // |
| // |
| // Max denormal value round to min normal value: |
| // Input: |
| // Sign | Exp (8 bit) | Frac (first 7 bit) | Frac (last 16 bit) |
| // S E E E E E E E E F F F F F F L RTTTTTTTTTTTTTTT |
| // 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1111111111111111 |
| // |
| // This falls into case 4. We create a carry from R and T, |
| // propagate into L and F, which then propagates into exponent |
| // bits: |
| // |
| // Output: |
| // Sign | Exp (8 bit) | Frac (first 7 bit) |
| // S E E E E E E E E F F F F F F L |
| // 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 |
| // |
| // Max normal value round to Inf: |
| // Input: |
| // Sign | Exp (8 bit) | Frac (first 7 bit) | Frac (last 16 bit) |
| // S E E E E E E E E F F F F F F L RTTTTTTTTTTTTTTT |
| // 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1111111111111111 |
| // |
| // This falls into case 4. We create a carry from R and T, |
| // propagate into L and F, which then propagates into exponent |
| // bits: |
| // |
| // Sign | Exp (8 bit) | Frac (first 7 bit) |
| // S E E E E E E E E F F F F F F L |
| // 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 |
| |
| // At this point, ff must be either a normal float, or +/-infinity. |
| output = float_to_bfloat16_rtne<true>(ff); |
| } |
| return output; |
| #endif |
| } |
| |
| // float_to_bfloat16_rtne template specialization that assumes that its function |
| // argument (ff) is either a normal floating point number, or +/-infinity, or |
| // zero. Used to improve the runtime performance of conversion from an integer |
| // type to bfloat16. |
| template <> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC __bfloat16_raw float_to_bfloat16_rtne<true>(float ff) { |
| #if defined(EIGEN_USE_HIP_BF16) |
| return __bfloat16_raw(__bfloat16_raw::round_to_bfloat16(ff)); |
| #else |
| numext::uint32_t input = numext::bit_cast<numext::uint32_t>(ff); |
| __bfloat16_raw output; |
| |
| // Least significant bit of resulting bfloat. |
| numext::uint32_t lsb = (input >> 16) & 1; |
| numext::uint32_t rounding_bias = 0x7fff + lsb; |
| input += rounding_bias; |
| output.value = static_cast<numext::uint16_t>(input >> 16); |
| return output; |
| #endif |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC float bfloat16_to_float(__bfloat16_raw h) { |
| #if defined(EIGEN_USE_HIP_BF16) |
| return static_cast<float>(h); |
| #else |
| return numext::bit_cast<float>(static_cast<numext::uint32_t>(h.value) << 16); |
| #endif |
| } |
| |
| // --- standard functions --- |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool(isinf)(const bfloat16& a) { |
| EIGEN_USING_STD(isinf); |
| #if defined(EIGEN_USE_HIP_BF16) |
| return (isinf)(a); // Uses HIP hip_bfloat16 isinf operator |
| #else |
| return (isinf)(float(a)); |
| #endif |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool(isnan)(const bfloat16& a) { |
| EIGEN_USING_STD(isnan); |
| #if defined(EIGEN_USE_HIP_BF16) |
| return (isnan)(a); // Uses HIP hip_bfloat16 isnan operator |
| #else |
| return (isnan)(float(a)); |
| #endif |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bool(isfinite)(const bfloat16& a) { |
| return !(isinf EIGEN_NOT_A_MACRO(a)) && !(isnan EIGEN_NOT_A_MACRO(a)); |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 abs(const bfloat16& a) { |
| numext::uint16_t x = numext::bit_cast<numext::uint16_t>(a) & 0x7FFF; |
| return numext::bit_cast<bfloat16>(x); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 exp(const bfloat16& a) { return bfloat16(::expf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 exp2(const bfloat16& a) { return bfloat16(::exp2f(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 expm1(const bfloat16& a) { return bfloat16(numext::expm1(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 log(const bfloat16& a) { return bfloat16(::logf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 log1p(const bfloat16& a) { return bfloat16(numext::log1p(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 log10(const bfloat16& a) { return bfloat16(::log10f(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 log2(const bfloat16& a) { |
| return bfloat16(static_cast<float>(EIGEN_LOG2E) * ::logf(float(a))); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 sqrt(const bfloat16& a) { return bfloat16(::sqrtf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 pow(const bfloat16& a, const bfloat16& b) { |
| return bfloat16(::powf(float(a), float(b))); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 atan2(const bfloat16& a, const bfloat16& b) { |
| return bfloat16(::atan2f(float(a), float(b))); |
| } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 sin(const bfloat16& a) { return bfloat16(::sinf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 cos(const bfloat16& a) { return bfloat16(::cosf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 tan(const bfloat16& a) { return bfloat16(::tanf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 asin(const bfloat16& a) { return bfloat16(::asinf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 acos(const bfloat16& a) { return bfloat16(::acosf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 atan(const bfloat16& a) { return bfloat16(::atanf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 sinh(const bfloat16& a) { return bfloat16(::sinhf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 cosh(const bfloat16& a) { return bfloat16(::coshf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 tanh(const bfloat16& a) { return bfloat16(::tanhf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 asinh(const bfloat16& a) { return bfloat16(::asinhf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 acosh(const bfloat16& a) { return bfloat16(::acoshf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 atanh(const bfloat16& a) { return bfloat16(::atanhf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 floor(const bfloat16& a) { return bfloat16(::floorf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 ceil(const bfloat16& a) { return bfloat16(::ceilf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 rint(const bfloat16& a) { return bfloat16(::rintf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 round(const bfloat16& a) { return bfloat16(::roundf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 trunc(const bfloat16& a) { return bfloat16(::truncf(float(a))); } |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 fmod(const bfloat16& a, const bfloat16& b) { |
| return bfloat16(::fmodf(float(a), float(b))); |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16(min)(const bfloat16& a, const bfloat16& b) { |
| const float f1 = static_cast<float>(a); |
| const float f2 = static_cast<float>(b); |
| return f2 < f1 ? b : a; |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16(max)(const bfloat16& a, const bfloat16& b) { |
| const float f1 = static_cast<float>(a); |
| const float f2 = static_cast<float>(b); |
| return f1 < f2 ? b : a; |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 fmin(const bfloat16& a, const bfloat16& b) { |
| const float f1 = static_cast<float>(a); |
| const float f2 = static_cast<float>(b); |
| return bfloat16(::fminf(f1, f2)); |
| } |
| |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC bfloat16 fmax(const bfloat16& a, const bfloat16& b) { |
| const float f1 = static_cast<float>(a); |
| const float f2 = static_cast<float>(b); |
| return bfloat16(::fmaxf(f1, f2)); |
| } |
| |
| #ifndef EIGEN_NO_IO |
| EIGEN_ALWAYS_INLINE std::ostream& operator<<(std::ostream& os, const bfloat16& v) { |
| os << static_cast<float>(v); |
| return os; |
| } |
| #endif |
| |
| } // namespace bfloat16_impl |
| |
| namespace internal { |
| |
| template <> |
| struct is_arithmetic<bfloat16> { |
| enum { value = true }; |
| }; |
| |
| template <> |
| struct random_impl<bfloat16> { |
| enum : int { MantissaBits = 7 }; |
| using Impl = random_impl<float>; |
| static EIGEN_DEVICE_FUNC inline bfloat16 run(const bfloat16& x, const bfloat16& y) { |
| float result = Impl::run(x, y, MantissaBits); |
| return bfloat16(result); |
| } |
| static EIGEN_DEVICE_FUNC inline bfloat16 run() { |
| float result = Impl::run(MantissaBits); |
| return bfloat16(result); |
| } |
| }; |
| |
| } // namespace internal |
| |
| template <> |
| struct NumTraits<Eigen::bfloat16> : GenericNumTraits<Eigen::bfloat16> { |
| enum { IsSigned = true, IsInteger = false, IsComplex = false, RequireInitialization = false }; |
| |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR static EIGEN_STRONG_INLINE Eigen::bfloat16 epsilon() { |
| return bfloat16_impl::raw_uint16_to_bfloat16(0x3c00); |
| } |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR static EIGEN_STRONG_INLINE Eigen::bfloat16 dummy_precision() { |
| return bfloat16_impl::raw_uint16_to_bfloat16(0x3D4D); // bfloat16(5e-2f); |
| } |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR static EIGEN_STRONG_INLINE Eigen::bfloat16 highest() { |
| return bfloat16_impl::raw_uint16_to_bfloat16(0x7F7F); |
| } |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR static EIGEN_STRONG_INLINE Eigen::bfloat16 lowest() { |
| return bfloat16_impl::raw_uint16_to_bfloat16(0xFF7F); |
| } |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR static EIGEN_STRONG_INLINE Eigen::bfloat16 infinity() { |
| return bfloat16_impl::raw_uint16_to_bfloat16(0x7f80); |
| } |
| EIGEN_DEVICE_FUNC EIGEN_CONSTEXPR static EIGEN_STRONG_INLINE Eigen::bfloat16 quiet_NaN() { |
| return bfloat16_impl::raw_uint16_to_bfloat16(0x7fc0); |
| } |
| }; |
| |
| } // namespace Eigen |
| |
| #if defined(EIGEN_HAS_HIP_BF16) |
| #pragma pop_macro("EIGEN_CONSTEXPR") |
| #endif |
| |
| namespace Eigen { |
| namespace numext { |
| |
| template <> |
| EIGEN_DEVICE_FUNC EIGEN_ALWAYS_INLINE bool(isnan)(const Eigen::bfloat16& h) { |
| return (bfloat16_impl::isnan)(h); |
| } |
| |
| template <> |
| EIGEN_DEVICE_FUNC EIGEN_ALWAYS_INLINE bool(isinf)(const Eigen::bfloat16& h) { |
| return (bfloat16_impl::isinf)(h); |
| } |
| |
| template <> |
| EIGEN_DEVICE_FUNC EIGEN_ALWAYS_INLINE bool(isfinite)(const Eigen::bfloat16& h) { |
| return (bfloat16_impl::isfinite)(h); |
| } |
| |
| template <> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC Eigen::bfloat16 bit_cast<Eigen::bfloat16, uint16_t>(const uint16_t& src) { |
| return Eigen::bfloat16_impl::raw_uint16_to_bfloat16(src); |
| } |
| |
| template <> |
| EIGEN_STRONG_INLINE EIGEN_DEVICE_FUNC uint16_t bit_cast<uint16_t, Eigen::bfloat16>(const Eigen::bfloat16& src) { |
| return Eigen::bfloat16_impl::raw_bfloat16_as_uint16(src); |
| } |
| |
| } // namespace numext |
| } // namespace Eigen |
| |
| #if EIGEN_HAS_STD_HASH |
| namespace std { |
| template <> |
| struct hash<Eigen::bfloat16> { |
| EIGEN_STRONG_INLINE std::size_t operator()(const Eigen::bfloat16& a) const { |
| return static_cast<std::size_t>(Eigen::numext::bit_cast<Eigen::numext::uint16_t>(a)); |
| } |
| }; |
| } // namespace std |
| #endif |
| |
| // Add the missing shfl* intrinsics. |
| // The __shfl* functions are only valid on HIP or _CUDA_ARCH_ >= 300. |
| // CUDA defines them for (__CUDA_ARCH__ >= 300 || !defined(__CUDA_ARCH__)) |
| // |
| // HIP and CUDA prior to SDK 9.0 define |
| // __shfl, __shfl_up, __shfl_down, __shfl_xor for int and float |
| // CUDA since 9.0 deprecates those and instead defines |
| // __shfl_sync, __shfl_up_sync, __shfl_down_sync, __shfl_xor_sync, |
| // with native support for __half and __nv_bfloat16 |
| // |
| // Note that the following are __device__ - only functions. |
| #if defined(EIGEN_HIPCC) |
| |
| #if defined(EIGEN_HAS_HIP_BF16) |
| |
| __device__ EIGEN_STRONG_INLINE Eigen::bfloat16 __shfl(Eigen::bfloat16 var, int srcLane, int width = warpSize) { |
| const int ivar = static_cast<int>(Eigen::numext::bit_cast<Eigen::numext::uint16_t>(var)); |
| return Eigen::numext::bit_cast<Eigen::bfloat16>(static_cast<Eigen::numext::uint16_t>(__shfl(ivar, srcLane, width))); |
| } |
| |
| __device__ EIGEN_STRONG_INLINE Eigen::bfloat16 __shfl_up(Eigen::bfloat16 var, unsigned int delta, |
| int width = warpSize) { |
| const int ivar = static_cast<int>(Eigen::numext::bit_cast<Eigen::numext::uint16_t>(var)); |
| return Eigen::numext::bit_cast<Eigen::bfloat16>(static_cast<Eigen::numext::uint16_t>(__shfl_up(ivar, delta, width))); |
| } |
| |
| __device__ EIGEN_STRONG_INLINE Eigen::bfloat16 __shfl_down(Eigen::bfloat16 var, unsigned int delta, |
| int width = warpSize) { |
| const int ivar = static_cast<int>(Eigen::numext::bit_cast<Eigen::numext::uint16_t>(var)); |
| return Eigen::numext::bit_cast<Eigen::bfloat16>( |
| static_cast<Eigen::numext::uint16_t>(__shfl_down(ivar, delta, width))); |
| } |
| |
| __device__ EIGEN_STRONG_INLINE Eigen::bfloat16 __shfl_xor(Eigen::bfloat16 var, int laneMask, int width = warpSize) { |
| const int ivar = static_cast<int>(Eigen::numext::bit_cast<Eigen::numext::uint16_t>(var)); |
| return Eigen::numext::bit_cast<Eigen::bfloat16>( |
| static_cast<Eigen::numext::uint16_t>(__shfl_xor(ivar, laneMask, width))); |
| } |
| |
| #endif // HIP |
| |
| #endif // __shfl* |
| |
| #if defined(EIGEN_HIPCC) |
| EIGEN_STRONG_INLINE __device__ Eigen::bfloat16 __ldg(const Eigen::bfloat16* ptr) { |
| return Eigen::bfloat16_impl::raw_uint16_to_bfloat16( |
| __ldg(Eigen::numext::bit_cast<const Eigen::numext::uint16_t*>(ptr))); |
| } |
| #endif // __ldg |
| |
| #endif // EIGEN_BFLOAT16_H |