doc/TutorialLinearAlgebra.dox

namespace Eigen {

/** \eigenManualPage TutorialLinearAlgebra Linear algebra and decompositions

This page explains how to solve linear systems, compute various decompositions such as LU,
QR, %SVD, eigendecompositions... After reading this page, don't miss our
\link TopicLinearAlgebraDecompositions catalogue \endlink of dense matrix decompositions.

\eigenAutoToc

\section TutorialLinAlgBasicSolve Basic linear solving

\b The \b problem: You have a system of equations, that you have written as a single matrix equation
    \f[ Ax \: = \: b \f]
Where \a A and \a b are matrices (\a b could be a vector, as a special case). You want to find a solution \a x.

\b The \b solution: You can choose between various decompositions, depending on the properties of your matrix \a A,
and depending on whether you favor speed or accuracy. However, let's start with an example that works in all cases,
and is a good compromise:
<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgExSolveColPivHouseholderQR.cpp </td>
  <td>\verbinclude TutorialLinAlgExSolveColPivHouseholderQR.out </td>
</tr>
</table>

In this example, the colPivHouseholderQr() method returns an object of class ColPivHouseholderQR. Since here the
matrix is of type Matrix3f, this line could have been replaced by:
\code
ColPivHouseholderQR<Matrix3f> dec(A);
Vector3f x = dec.solve(b);
\endcode

Here, ColPivHouseholderQR is a QR decomposition with column pivoting. It's a good compromise for this tutorial, as it
works for all matrices while being quite fast. Here is a table of some other decompositions that you can choose from,
depending on your matrix, the problem you are trying to solve, and the trade-off you want to make:

<table class="manual">
    <tr>
        <th>Decomposition</th>
        <th>Method</th>
        <th>Requirements<br/>on the matrix</th>
        <th>Speed<br/> (small-to-medium)</th>
        <th>Speed<br/> (large)</th>
        <th>Robustness<sup><a href="#note_robust">*</a></sup></th>
    </tr>
    <tr>
        <td>LLT</td>
        <td>llt()</td>
        <td>Positive definite</td>
        <td>+++</td>
        <td>+++</td>
        <td>+</td>
    </tr>
    <tr class="alt">
        <td>LDLT</td>
        <td>ldlt()</td>
        <td>Positive or negative<br/> semidefinite</td>
        <td>+++</td>
        <td>+</td>
        <td>++</td>
    </tr>
    <tr>
        <td>PartialPivLU</td>
        <td>partialPivLu()</td>
        <td>Invertible</td>
        <td>++</td>
        <td>++</td>
        <td>+</td>
    </tr>
    <tr class="alt">
        <td>HouseholderQR</td>
        <td>householderQr()</td>
        <td>None</td>
        <td>++</td>
        <td>++</td>
        <td>+</td>
    </tr>
    <tr>
        <td>ColPivHouseholderQR</td>
        <td>colPivHouseholderQr()</td>
        <td>None</td>
        <td>+</td>
        <td>-</td>
        <td>+++</td>
    </tr>
    <tr class="alt">
        <td>CompleteOrthogonalDecomposition</td>
        <td>completeOrthogonalDecomposition()</td>
        <td>None</td>
        <td>+</td>
        <td>-</td>
        <td>+++</td>
    </tr>
    <tr>
        <td>BDCSVD</td>
        <td>bdcSvd()</td>
        <td>None</td>
        <td>-</td>
        <td>-</td>
        <td>+++</td>
    </tr>
    <tr class="alt">
        <td>JacobiSVD</td>
        <td>jacobiSvd()</td>
        <td>None</td>
        <td>-</td>
        <td>- - -</td>
        <td>+++</td>
    </tr>
</table>

<a name="note_robust"><b>*</b></a> The <b>Robustness</b> column indicates how well the decomposition handles
ill-conditioned or rank-deficient matrices. All decompositions give excellent accuracy when their
requirements on the matrix are met and the problem is well-conditioned.

To get an overview of the true relative speed of the different decompositions, check this \link DenseDecompositionBenchmark benchmark \endlink.

All of these decompositions offer a solve() method that works as in the above example.

\b Practical \b recommendations:
\li If your matrix is symmetric positive definite, use \b LLT. It is the fastest and is perfectly accurate
    for this class of problems. If your matrix is only positive or negative semidefinite, use \b LDLT.
\li For a general invertible matrix, \b PartialPivLU is the best choice. It is fast (uses cache-friendly
    blocking) and reliable for the vast majority of problems.
\li For least squares problems (over- or under-determined systems), \b CompleteOrthogonalDecomposition
    is the recommended default. Like the SVD, it robustly computes the minimum-norm solution for
    rank-deficient and under-determined problems, but at the cost of a QR decomposition rather than
    an SVD. Use \b ColPivHouseholderQR if you only need least squares for full-rank overdetermined
    systems and don't need the minimum-norm property.
\li \b SVD decompositions (BDCSVD, JacobiSVD) are the most robust but also the slowest. Use these when
    you need singular values/vectors, not just the solution.
\li \b HouseholderQR is the fastest option for full-rank least squares problems, but it does not
    reveal rank and cannot compute minimum-norm solutions for rank-deficient problems.
\li FullPivLU and FullPivHouseholderQR use complete pivoting, which is significantly slower due to
    lack of blocking. In practice, they rarely provide meaningful benefits over PartialPivLU and
    ColPivHouseholderQR, respectively, and are not recommended for general use. They are primarily useful
    for debugging or for pedagogical purposes.

Here's an example showing the use of LLT for a symmetric positive definite system, also demonstrating
that using a general matrix (not a vector) as right hand side is possible:

<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgExSolveLDLT.cpp </td>
  <td>\verbinclude TutorialLinAlgExSolveLDLT.out </td>
</tr>
</table>

For a \ref TopicLinearAlgebraDecompositions "much more complete table" comparing all decompositions supported by Eigen (notice that Eigen
supports many other decompositions), see our special page on
\ref TopicLinearAlgebraDecompositions "this topic".


\section TutorialLinAlgLeastsquares Least squares solving

The recommended method to solve under- or over-determined linear systems in the least squares sense is
\b CompleteOrthogonalDecomposition. Like the SVD, it robustly computes the minimum-norm least squares
solution, correctly handling rank-deficient and under-determined problems, but it is significantly faster
since it is based on a rank-revealing QR decomposition rather than a full SVD.

If you also need the singular values or vectors themselves (not just the least squares solution), use
\b BDCSVD, which scales well for large problems and automatically falls back to JacobiSVD for smaller ones.

Here is an example using the SVD:
<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgSVDSolve.cpp </td>
  <td>\verbinclude TutorialLinAlgSVDSolve.out </td>
</tr>
</table>

If you know more about the problem, faster methods are available.
If your matrix is full rank, HouseholderQR is the fastest method. If your matrix is full rank and
well conditioned, using the Cholesky decomposition (LLT) on the normal equations can be faster still.
Our page on \link LeastSquares least squares solving \endlink has more details.


\section TutorialLinAlgSolutionExists Checking if a matrix is singular

Only you know what error margin you want to allow for a solution to be considered valid.
So Eigen lets you do this computation for yourself, if you want to, as in this example:

<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgExComputeSolveError.cpp </td>
  <td>\verbinclude TutorialLinAlgExComputeSolveError.out </td>
</tr>
</table>

\section TutorialLinAlgEigensolving Computing eigenvalues and eigenvectors

You need an eigendecomposition here, see available such decompositions on \ref TopicLinearAlgebraDecompositions "this page".
Make sure to check if your matrix is self-adjoint, as is often the case in these problems. Here's an example using
SelfAdjointEigenSolver, it could easily be adapted to general matrices using EigenSolver or ComplexEigenSolver.

The computation of eigenvalues and eigenvectors does not necessarily converge, but such failure to converge is
very rare. The call to info() is to check for this possibility.

<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgSelfAdjointEigenSolver.cpp </td>
  <td>\verbinclude TutorialLinAlgSelfAdjointEigenSolver.out </td>
</tr>
</table>

\section TutorialLinAlgInverse Computing inverse and determinant

First of all, make sure that you really want this. While inverse and determinant are fundamental mathematical concepts,
in \em numerical linear algebra they are not as useful as in pure mathematics. Inverse computations are often
advantageously replaced by solve() operations, and the determinant is often \em not a good way of checking if a matrix
is invertible.

However, for \em very \em small matrices, the above may not be true, and inverse and determinant can be very useful.

While certain decompositions, such as PartialPivLU and FullPivLU, offer inverse() and determinant() methods, you can also
call inverse() and determinant() directly on a matrix. If your matrix is of a very small fixed size (at most 4x4) this
allows Eigen to avoid performing a LU decomposition, and instead use formulas that are more efficient on such small matrices.

Here is an example:
<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgInverseDeterminant.cpp </td>
  <td>\verbinclude TutorialLinAlgInverseDeterminant.out </td>
</tr>
</table>

\section TutorialLinAlgSeparateComputation Separating the computation from the construction

In the above examples, the decomposition was computed at the same time that the decomposition object was constructed.
There are however situations where you might want to separate these two things, for example if you don't know,
at the time of the construction, the matrix that you will want to decompose; or if you want to reuse an existing
decomposition object.

What makes this possible is that:
\li all decompositions have a default constructor,
\li all decompositions have a compute(matrix) method that does the computation, and that may be called again
    on an already-computed decomposition, reinitializing it.

For example:

<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgComputeTwice.cpp </td>
  <td>\verbinclude TutorialLinAlgComputeTwice.out </td>
</tr>
</table>

Finally, you can tell the decomposition constructor to preallocate storage for decomposing matrices of a given size,
so that when you subsequently decompose such matrices, no dynamic memory allocation is performed (of course, if you
are using fixed-size matrices, no dynamic memory allocation happens at all). This is done by just
passing the size to the decomposition constructor, as in this example:
\code
HouseholderQR<MatrixXf> qr(50,50);
MatrixXf A = MatrixXf::Random(50,50);
qr.compute(A); // no dynamic memory allocation
\endcode

\section TutorialLinAlgRankRevealing Rank-revealing decompositions

Certain decompositions are rank-revealing, i.e. are able to compute the rank of a matrix. These are typically
also the decompositions that behave best in the face of a non-full-rank matrix (which in the square case means a
singular matrix). On \ref TopicLinearAlgebraDecompositions "this table" you can see for all our decompositions
whether they are rank-revealing or not.

Rank-revealing decompositions offer at least a rank() method. They can also offer convenience methods such as isInvertible(),
and some are also providing methods to compute the kernel (null-space) and image (column-space) of the matrix.
ColPivHouseholderQR, CompleteOrthogonalDecomposition, and FullPivLU all provide these methods. Here is an example using
FullPivLU:

<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgRankRevealing.cpp </td>
  <td>\verbinclude TutorialLinAlgRankRevealing.out </td>
</tr>
</table>

Of course, any rank computation depends on the choice of an arbitrary threshold, since practically no
floating-point matrix is \em exactly rank-deficient. Eigen picks a sensible default threshold, which depends
on the decomposition but is typically the diagonal size times machine epsilon. While this is the best default we
could pick, only you know what is the right threshold for your application. You can set this by calling setThreshold()
on your decomposition object before calling rank() or any other method that needs to use such a threshold.
The decomposition itself, i.e. the compute() method, is independent of the threshold. You don't need to recompute the
decomposition after you've changed the threshold.

<table class="example">
<tr><th>Example:</th><th>Output:</th></tr>
<tr>
  <td>\include TutorialLinAlgSetThreshold.cpp </td>
  <td>\verbinclude TutorialLinAlgSetThreshold.out </td>
</tr>
</table>

*/

}